• Membrane modules designed for cross-flow filtration
• Modules contain hydrophobic capillary membranes made of polypropylene (PP)
• Filtration direction from inside to outside of capillary
• Suitable for wide variety of liquids, without chemical pre-treatment, if possible
• Very good chemical resistance
• Low susceptibility to clogging
• Back flush method of cleaning
• Excellent regeneration and disinfections possibilities
• High packing density per unit of volume
• Very good mechanical strength of capillaries
• Different possibilities of industrial and laboratory Applications
• Tested filtration coefficients
• Standard series of types
• Customized test modules available

Range of filtration surface: 0.25 m² - 3.00 m²
Nominal pore size of membrane: 0.3 μm*
Inner diameter of capillary: 1.8 mm
Volumetric porosity: 70 %
Maximum operating temperature: 60 °C

________

* Test results have been collected using a bubble point and solvent permeability method.

Housing: stainless steel (SS) or polypropylene (PP) or polyvinyl chloride (PVC)
Potting: epoxy resin or polyurethane
Membrane: polypropylene

How to install and start up rules including suitable and reliable usage and storage conditions are described in details in Module Data Sheets directly attached to our products.

Thanks to our long lasting experience we guarantee our customers professional consultancy and detailed advice on cleaning conditions, including back flush and back pulse methods. We also recommend and deliver chemical agents for module regeneration specifically to given application.