• Nominal Rated Filter Cartridges for Depth Filtration 
• Graded Density Structure for High Dirt Holding Capacity and Long Service Life
• Excellent Flow Characteristics
• All Polypropylene or All Nylon Construction
• Free from Adhesives, Binders and Resins
• Rigid Filter Structure with Centre Core
• No Fibre Release
• Strictly Controlled Melt Blown Production Process
• Lot Number Printed on Individual Cartridge Label

Filtration Efficiency *

• Minimum 95%

• 1 µm – 90 µm
• Cartridges over 90 µm are also available.

• Filter: Polypropylene or Nylon
• Core: Polypropylene or Nylon

• All materials of polypropylene filter cartridges meet FDA requirements.

• Core Inside Diameter: 1.1” (28 mm)
• Outside Diameter: 2.5” (64 mm)
• Length: 10” (254 mm), 20” (508 mm), 30” (762 mm), 40” (1016 mm), 50” (1270 mm) and 60” (1524 mm)

• Maximum Temperature: 80 ºC (Polypropylene Cartridges) or 150 ºC (Nylon Cartridges)
• Maximum Differential Pressure: 4 Bar at 20 ºC
• Recommended Change Differential Pressure: 2 Bar

• Ethylene Oxide

Liquid: Water
Length of Cartridges: 10”
Temperature: 20 ºC

• Strictly Controlled Melt Blown Manufacturing Process
• Fully Repeatable Structure of the Product
• Production in Controlled Environment
• Manufacture According to Rules of ISO 9001 Quality System
• Recycling of All Waste Products

• Samples are tested using a single pass, modified test.
• Lot number is printed on individual cartridge label.

• Filter fineness is imprinted on every cartridge.
• Product code, lot number and production date are printed on individual cartridge label.

____________

* Test results are collected using a single pass, modified, destructive test with A3 BSW laser particle counter. As the test contaminant ISO Fine Test Dust 12103-1, A2 and ISO Coarse Test Dust 12103-1, A4 are used for filter ranges from 1 µm to 20 µm and over 20 µm respectively.