Short Description
- Absolute Rated Filter Cartridges (β 5000)
for Depth
Filtration
 Graded Density Structure for High Dirt Holding Capacity and Long
Service Life- Excellent Flow Characteristics
- All Polypropylene or All Nylon Construction
- Free from Adhesives, Binders and Resins
- Rigid Filter Structure with Centre Core
- Optional Steel Centre Cores
- Advanced, Microprocessor Controlled Melt Blown Production Process
- Lot Number Printed on Individual Cartridge Label
Specification
Filtration Efficiency *
- Minimum 99.98% i.e. β (beta ratio) 5000 on 0.5 μm to 20
μm
Filter Fineness
- Polypropylene Filter Cartridges: 0.5 μm – 90 μm
- Nylon Filter Cartridges: 1 μm – 90 μm
- Micron rating over 90 μm is available.
Materials of Construction
- Filter: Polypropylene or Nylon
- Core: Polypropylene or Nylon or Tinned Carbon Steel or 316
Stainless Steel
- End Caps: Polypropylene or Nylon
- End Cap – Filter Joining Substance: Melted Polypropylene or
Nylon
- Gaskets for DOE: Polyethylene
- O-rings: Buna N, EPDM, Viton, Silicone
FDA Materials
- All materials of polypropylene filter cartridges meet FDA
requirements.
Standard Dimensions
- Core Inside Diameter: 1.1” (28 mm)
- Outside Diameter: 2.5” (64 mm)
- Length: 10” (254 mm), 20” (508 mm), 30” (762 mm), 40”
(1016 mm), 50” (1270 mm) and 60” (1524 mm)
End Caps
- Code 2
- First End: Opened Cap with 2 x 226 O-ring and Double Bayonet
- Second End: Closed Flat Cap (No Spear)
- Code 3
- First End: Opened Cap with 2 x 222 O-ring
- Second End: Closed Flat Cap (No Spear)
- Code 7
- First End: Opened Cap with 2 x 226 O-ring and Double Bayonet
- Second End: Closed Cap with Spear
- Code 8
- First End: Opened Cap with 2 x 222 O-ring
- Second End: Closed Cap with Spear
- No End Caps: Double Open Ended (DOE)
Seals
- Polyethylene Flat Gaskets for DOE only
- Buna N O-rings
- EPDM O-rings
- Viton O-rings
- Silicone O-rings
Operating Conditions
- Maximum Temperature: 80 ºC (Polypropylene Cartridges) or 150
ºC (Nylon Cartridges)
- Maximum Differential Pressure: 4 Bar at 30 ºC
- Recommended Change Differential Pressure: 2 Bar
Sterilization
Particle Retention Ratings *
Example of Graph for aA1P10-5-XX ** Filter Cartridge
Flow: 600 l/h
Graphs of other cartridges are available on request.
Flows
Flow Rates vs Pressure Drop
Liquid: Water
Length of Cartridges: 10”
Temperature: 20 ºC
Quality
Production
- Computer Controlled Melt Blown Manufacturing Process
- Programmable and Fully Repeatable Structure of the Product
- Production in Controlled Environment
- Manufacture According to Rules of ISO 9001 Quality System
- Recycling of All Waste Products
Quality Control
- Samples from all lots are tested using a single pass, modified
test.
- Lot number is printed on individual cartridge label.
Product Marking
- Product code is imprinted on every cartridge.
- Product code, lot number and production date are printed on
individual cartridge label.
Ordering Guide
|